ULTRASONIC SENSOR (for Front) INSTALLATION


  1. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER

    A01DQK6E01
    Text in Illustration
    *1 Keyhole

    Tech Tips

    Use the same procedure to install the No. 1 ultrasonic sensor retainer on the other side.


    1. Align the keyhole and protrusion as shown in the illustration.

    2. Install the No. 1 ultrasonic sensor retainer to the front bumper cover.

      Note

      Do not damage the bumper cover with the protrusion when installing the retainer.

  2. INSTALL NO. 1 ULTRASONIC SENSOR

    Tech Tips

    Use the same procedure to install the No. 1 ultrasonic sensor on the other side.


    1. Attach the 2 claws to install the No. 1 ultrasonic sensor.

    2. Connect the connector.

  3. INSTALL FRONT BUMPER COVER


    1. w/ TOYOTA Parking Assist-sensor System, w/ Fog Light:

      Connect the 3 connectors.

    2. w/ TOYOTA Parking Assist-sensor System, w/o Fog Light:

      Connect the connector.

    3. w/o TOYOTA Parking Assist-sensor System, w/ Fog Light:

      Connect the 2 connectors.

    4. w/ Headlight Cleaner System:

      Connect the No. 1 headlight cleaner hose.

    5. Attach the 16 claws to install the front bumper cover.

      Note

      Do not hold the middle of the front bumper cover, as it may become reformed.

    6. Install the 4 clips.

    7. A01DT5KE01
      Text in Illustration
      *1 Screw
      *2 Bolt A
      *3 Bolt B

      Install the 2 bolts labeled A and 2 bolts labeled B.

      Torque:
      bolt B
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    8. Install the 2 screws.

    9. Install the 2 screws.

      Tech Tips

      Use the same procedure for the screws on the other side.

  4. INSTALL RADIATOR GRILLE


    1. Attach the 8 claws to install the radiator grille.

    2. Install the 4 screws.

  5. INSTALL UPPER RADIATOR SUPPORT SEAL


    1. Install the upper radiator support seal with the 13 clips.