Click here

ULTRASONIC SENSOR (for Front) REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE UPPER RADIATOR SUPPORT SEAL


    1. Remove the 13 clips and upper radiator support seal.

  2. Click here

    REMOVE RADIATOR GRILLE


    1. Put protective tape around the radiator grille.

    2. Remove the 4 screws.

    3. Detach the 8 claws and remove the radiator grille.

      Table 1. Text in Illustration
      *1 Protective Tape
  3. Click here

    REMOVE FRONT BUMPER COVER


    1. A01DPU0

      Remove the 2 screws.

      Tip:

      Use the same procedure for the screws on the other side.

    2. A01DT5KE01

      Remove the 2 screws.

      Table 2. Text in Illustration
      *1 Screw
      *2 Bolt A
      *3 Bolt B

    3. Remove the 2 bolts labeled A and 2 bolts labeled B.

    4. A01DM67E01

      Put protective tape around the front bumper cover.

      Table 3. Text in Illustration
      *1 Protective Tape

    5. Remove the 4 clips.

    6. Detach the 16 claws and remove the front bumper cover.

      Note:

      Do not hold the middle of the front bumper cover, as it may become reformed.

    7. w/ TOYOTA Parking Assist-sensor System, w/ Fog Light:

      Disconnect the 3 connectors.

    8. w/ TOYOTA Parking Assist-sensor System, w/o Fog Light:

      Disconnect the connector.

    9. w/o TOYOTA Parking Assist-sensor System, w/ Fog Light:

      Disconnect the 2 connectors.

    10. w/ Headlight Cleaner System:

      Disconnect the No. 1 headlight cleaner hose.

  4. Click here

    REMOVE NO. 1 ULTRASONIC SENSOR

    Tip:

    Use the same procedure to remove the No. 1 ultrasonic sensor on the other side.


    1. Disconnect the connector.

    2. Detach the 2 claws and remove the No. 1 ultrasonic sensor.

  5. Click here

    REMOVE NO. 1 ULTRASONIC SENSOR RETAINER

    Tip:

    Use the same procedure to remove the No. 1 ultrasonic sensor retainer on the other side.


    1. Detach the 2 claws and remove the No. 1 ultrasonic sensor retainer.