| Fuel pressure | Standard fuel pressure | at idle | 321 to 327 kPa (3.27 to 3.33 kgf/cm2, 46.5 to 47.4 psi) |
||
| remains for 5 minutes after engine has stopped | 147 kPa (1.5 kgf/cm2, 21 psi) or higher |
||||
| Fuel injector | Standard resistance | Tester Connection | Condition | Specified Condition | |
| 1 - 2 | 20°C (68°F) | 11.6 to 12.4 Ω | |||
| Standard injection volume | 71 to 86 cm3(4.3 to 5.2 cu. in.) per 15 seconds |
||||
| Difference between each injector | 15 cm3(0.9 cu. in.) or less |
||||
| Standard fuel leakage | 1 drop or less per 12 minutes | ||||
| Fuel pump (for Single Tank Type) | Standard resistance | Tester Connection | Condition | Specified Condition | |
| 1 - 2 | 20°C (68°F) | 0.2 to 3.0 Ω | |||
| Fuel pump (for Double Tank Type) | Standard resistance | Tester Connection | Condition | Specified Condition | |
| 1 - 2 | 20°C (68°F) | 0.2 to 3.0 Ω | |||
| Fuel sender gauge assembly (for Single Tank Type) | Standard resistance | Tester Connection | Condition | Specified Condition | |
| 2 - 3 | Float position is F (upper) | 13.5 to 16.5 Ω | |||
| Float position is E (lower) | 405.5 to 414.5 Ω | ||||
| Fuel sender gauge assembly (for Double Tank Type) | for Fuel Main Tank | Standard resistance | Tester Connection | Condition | Specified Condition |
| 2 - 3 | Float position is F (upper) | 13.6 to 16.5 Ω | |||
| Float position is E (lower) | 405.5 to 414.5 Ω | ||||
| for Fuel Sub Tank | Standard resistance | Tester Connection | Condition | Specified Condition | |
| 1 - 2 | Float position is F (upper) | 13.5 to 16.5 Ω | |||
| Float position is E (lower) | 405.5 to 414.5 Ω | ||||