REAR BUMPER DISASSEMBLY


  1. REMOVE NO. 2 LUGGAGE ROOM WIRE (w/ Intuitive Parking Assist System)


    1. A01HPU8

      Disengage the 4 clamps.

    2. Disconnect the connector and remove the No. 2 luggage room wire.

  2. REMOVE ULTRASONIC SENSOR CLIP (w/ Intuitive Parking Assist System)


    1. A01HQWXE01
      Text in Illustration
      *A LH Side
      *B Other Side

      Disconnect the connector.

    2. Disengage the clamp.

    3. A01HQMTE01
      Text in Illustration
      *A LH Side
      *B Other Side

      Disengage the 4 claws to remove the ultrasonic sensor clip.

  3. REMOVE NO. 1 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)


    1. A01HNBQE01
      Text in Illustration
      *A LH Side
      *B Other Side

      Disengage the 2 claws to remove the No. 1 ultrasonic sensor.

  4. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)


    1. A01HO1XE01
      Text in Illustration
      *A LH Side
      *B Other Side

      Disengage the 2 claws to remove the No. 1 ultrasonic sensor retainer from the rear bumper assembly.

  5. REMOVE REAR BUMPER SIDE RETAINER LH


    1. A01HPEP

      Remove the 3 screws.

    2. Disengage the 6 claws and remove the rear bumper side retainer LH.

  6. REMOVE REAR BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure as for the LH side.

  7. REMOVE WHEEL HOUSE REINFORCEMENT LH


    1. Disengage the clip.

    2. A01HQYY

      Remove the screw.

    3. Remove the nut and wheel house reinforcement LH.

  8. REMOVE WHEEL HOUSE REINFORCEMENT RH

    Tech Tips

    Use the same procedure as for the LH side.

  9. REMOVE REAR BUMPER ENERGY ABSORBER


    1. A01HNI8

      Disengage the 2 guides and remove the rear bumper energy absorber.

  10. REMOVE REAR BUMPER REINFORCEMENT SUB-ASSEMBLY


    1. A01HPXD

      Remove the 6 nuts and rear bumper reinforcement sub-assembly.