FRONT BUMPER REASSEMBLY


  1. INSTALL FRONT BUMPER SIDE RETAINER LH


    1. A01HQM0

      Engage the claw.

    2. Install the front bumper side retainer LH with the bolt.

      Torque:
      4.1 N*m  { 42 kgf*cm, 36 in.*lbf }

  2. INSTALL FRONT BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure as for the LH side.

  3. INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY


    1. A01HR38

      Install the front bumper reinforcement sub-assembly with the 6 bolts.

      Torque:
      61 N*m  { 622 kgf*cm, 45 ft.*lbf }

    2. Engage the 5 clamps.

  4. INSTALL FRONT BUMPER ENERGY ABSORBER


    1. A01HNIS

      Engage the 2 guides to install the front bumper energy absorber.

  5. INSTALL NO. 1 LOWER RADIATOR GRILLE


    1. for Standard:


      1. A01HPU6

        Engage the 2 guides and 16 claws to install the No. 1 lower radiator grille.

    2. for Sport Package:


      1. A01HOFK

        Engage the 2 guides and 6 claws to install the No. 1 lower radiator grille.

  6. INSTALL FRONT BUMPER HOLE COVER LH (for Standard)


    1. w/ Fog Light:


      1. A01HMEK

        Engage the 2 claws and 2 guides to install the fog light mounting bracket LH.

    2. A01HN0B

      Engage the 5 claws to install the front bumper hole cover LH.

  7. INSTALL FRONT BUMPER HOLE COVER RH (for Standard)

    Tech Tips

    Use the same procedure as for the LH side.

  8. INSTALL FRONT BUMPER HOLE COVER LH (for Sport Package)


    1. A01HNKB

      Engage the 3 claws and guide to install the fog light mounting bracket LH.

    2. A01HN2Z

      Engage the 2 claws to install the front bumper side moulding LH.

    3. Install the 2 screws.

    4. A01HQ17

      Engage the 7 claws to install the front bumper hole cover LH.

    5. Install the 2 screws.

  9. INSTALL FRONT BUMPER HOLE COVER RH (for Sport Package)

    Tech Tips

    Use the same procedure as for the LH side.

  10. INSTALL FRONT FENDER LINER RETAINER


    1. A01HPX8

      Engage the claw to install the front fender liner retainer.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  11. INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET (for Standard)


    1. w/o Side Turn Signal Light:


      1. A01HPLFE01
        Text in Illustration
        *1 Hook

        Engage the 2 hooks.

      2. Install the front bumper extension mounting bracket with the 2 screws.

    2. w/ Side Turn Signal Light:


      1. A01HO2X
        Text in Illustration
        *1 Hook

        Engage the 2 hooks.

      2. Install the front bumper extension mounting bracket with the 2 screws.

  12. INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET (for Sport Package)


    1. A01HQJLE01
      Text in Illustration
      *1 Hook

      Engage the 2 hooks.

    2. Install the front bumper extension mounting bracket with the 2 screws.

  13. INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light)


    1. Engage the 2 guides.

    2. Install the fog light assembly with the screw.

      Torque:
      1.6 N*m  { 16 kgf*cm, 14 in.*lbf }

  14. INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)

    Tech Tips

    Use the same procedure as for the LH side.

  15. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)


    1. A01HN2BE01
      Text in Illustration
      *A LH Side
      *B RH Side
      *a Keyhole
      *b Snap

      Engage the 2 claws to install the No. 1 ultrasonic sensor retainer to the front bumper assembly.

      Note


      • Do not damage the front bumper with the protrusion when installing the retainer.

      • Securely install the No. 1 ultrasonic sensor retainer so that there are no gaps between the retainer and surface of the front bumper.

      Tech Tips

      When installing the retainer, align the keyhole and snap as shown in the illustration.

  16. INSTALL NO. 1 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)


    1. A01HNBQE01
      Text in Illustration
      *A LH Side
      *B RH Side

      Engage the 2 claws to install the No. 1 ultrasonic sensor to the No. 1 ultrasonic sensor retainer.

      Note

      Push the No. 1 ultrasonic sensor retainer from the outside of the bumper when there is a gap between the retainer and the bumper surface. In this case, do not push on the ultrasonic sensor.