FRONT BUMPER REMOVAL


  1. REMOVE RADIATOR GRILLE SUB-ASSEMBLY

    Click here

  2. REMOVE FRONT BUMPER ASSEMBLY


    1. A01HOXNE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the front bumper assembly.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    2. A01HP10E01
      Text in Illustration
      *1 Pin Hold Clip

      Using a screwdriver, turn the pins 90 degrees and remove the pin hold clip.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    3. Remove the clip.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    4. A01HMO3

      Remove the 6 screws.

    5. A01HNFK

      Disengage the 3 claws.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    6. A01HQJ2E01
      Text in Illustration
      *A w/ Intuitive Parking Assist System
      *B w/ Fog Light

      Pull back the side of the front bumper assembly as shown in the illustration and disconnect each connector.

      Note

      Do not apply excessive force when separating the front bumper assembly.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    7. A01HPNW

      Using a clip remover, remove the 3 clips.

    8. Remove the front bumper assembly.