LICENSE PLATE LIGHT ASSEMBLY REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.


  1. REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    Click here

  2. REMOVE LICENSE PLATE LIGHT ASSEMBLY


    1. A01HNLJ

      Disconnect the connector.

    2. Disengage the 2 claws and remove the license plate light assembly.

  3. REMOVE LICENSE PLATE LIGHT PACKING


    1. A01HQ02

      Remove the license plate light packing.

      Note

      Do not reuse the removed packing. Be sure to install a new license plate light packing to prevent water ingress.

  4. REMOVE LICENSE PLATE LIGHT LENS


    1. A01HP1ME03
      Text in Illustration
      *1 Protective Tape
      *a Insert into the hole

      Insert a screwdriver wrapped with protective tape into the license plate light lens hole, tilt it in the direction shown in the illustration and disengage the 2 claws to remove the license plate light lens.

  5. REMOVE LICENSE PLATE LIGHT BULB


    1. A01HPHY

      Remove the license plate light bulb.