REAR LIGHT ASSEMBLY ON-VEHICLE INSPECTION


  1. INSPECT REAR LIGHT ASSEMBLY LH


    1. A01HPMBE03
      Text in Illustration
      *a

      Front view of wire harness connector

      (to Rear Light Assembly LH)

      Disconnect the connector from the rear light assembly LH.

    2. Measure the voltage according to the value(s) in the table below.

      Standard Voltage
      Tester Connection Condition Specified Condition
      T18-2 (B) - T18-1 (E) Engine started and the shift lever not in R Below 1 V
      Engine started and the shift lever in R 11 to 14 V

      If the result is not as specified, repair or replace the wire harness or connector.

  2. INSPECT REAR LIGHT ASSEMBLY RH


    1. A01HPMBE04
      Text in Illustration
      *a

      Front view of wire harness connector

      (to Rear Light Assembly RH)

      Disconnect the connector from the rear light assembly RH.

    2. Measure the voltage according to the value(s) in the table below.

      Standard Voltage
      Tester Connection Condition Specified Condition
      T17-2 (B) - T17-1 (E) Engine started and the shift lever not in R Below 1 V
      Engine started and the shift lever in R 11 to 14 V

      If the result is not as specified, repair or replace the wire harness or connector.