REAR COMBINATION LIGHT ASSEMBLY REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.


  1. REMOVE REAR BUMPER ASSEMBLY

    Click here

  2. REMOVE SPARE WHEEL COVER ASSEMBLY


    1. Remove the spare wheel cover assembly.

  3. REMOVE BAGGAGE HOLDER NET (w/ Partition Net)


    1. Remove the baggage holder net.

  4. REMOVE REAR FLOOR FINISH PLATE


    1. A01HQ5Y

      Remove the 5 clips.

    2. A01HNUP

      Disengage the 4 clips and remove the rear floor finish plate.

  5. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK


    1. A01HMF6E01
      Text in Illustration
      *1 Pin

      Push the pin and remove the No. 1 luggage compartment trim hook.

  6. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER


    1. A01HPY3E01
      Text in Illustration
      *1 Clip <A>
      *2 Clip <B>

      Remove the clip <A>.

    2. Remove the 2 clips <B>.

    3. A01HR0W

      Disengage the fastener and remove the luggage compartment inner trim cover LH.

  7. REMOVE REAR COMBINATION LIGHT ASSEMBLY


    1. A01HOCE

      Disconnect each connector.

    2. Disengage the clamp.

    3. A01HN9T

      Remove the 4 nuts and rear combination light assembly.