WASHER MOTOR REMOVAL


  1. REMOVE FRONT WHEEL RH

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH


    1. A01HQYT

      Remove the 3 screws and front wheel opening extension pad RH.

  3. REMOVE FRONT FENDER LINER RH


    1. A01HP9X

      Remove the clip.

    2. A01HQOEE01
      Text in Illustration
      *a 90°

      Using a screwdriver, turn the pin 90 degrees counterclockwise and remove the pin hold clip.

    3. A01HNIDE01

      Remove the 5 screws.

    4. Remove the 4 clips, 2 grommets and front fender liner RH.

      Tech Tips

      The grommets need to be replaced with new ones because they will break when they are removed.

      Text in Illustration
      *1 Grommet

  4. DRAIN WASHER FLUID


    1. A01HOAV

      Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.

      Tech Tips

      Use a container to collect the washer fluid.

  5. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. A01HMN3

      Disconnect the connector.

    2. Remove the windshield washer motor and pump assembly as shown in the illustration.