WIPER SWITCH INSTALLATION


  1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY


    1. A01HQ8D

      Engage the claw to install the windshield wiper switch assembly as shown in the illustration.

    2. Connect the 2 connectors.

  2. INSTALL UPPER STEERING COLUMN COVER

    Note

    If the lower steering column cover is installed in the incorrect order, it will not be possible to assemble the steering column cover.


    1. Engage the 2 claws to install the upper steering column cover.

    2. Engage the 4 clips and 2 guides to install the instrument cluster finish panel to the upper steering column cover.

  3. INSTALL LOWER STEERING COLUMN COVER


    1. A01HN1X

      Engage the 2 claws.

    2. A01HP3O

      Engage the 2 claws.

      Tech Tips

      Press the area around the claws to engage them.

    3. Turn the steering wheel assembly to the left to install the screw.

      Torque:
      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }

    4. Turn the steering wheel assembly to the right to install the lower steering column cover with screw.

      Torque:
      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }

      Note


      • Check the steering column cover clearance to the steering wheel.

      • If the clearance is less than 3.5mm,confirm the steering column cover claws are correctly engaged.

      • Replace the steering column cover if any claws have been damaged.