LUGGAGE DOOR HINGE TORSION BAR REMOVAL

Note

After installing the torsion bar, use your hand to open and close the luggage door. Make sure the luggage door can open and close smoothly.


  1. REMOVE SPARE WHEEL COVER ASSEMBLY


    1. Remove the spare wheel cover assembly.

  2. REMOVE REAR FLOOR FINISH PLATE


    1. A01HQ5Y

      Remove the 5 clips.

    2. A01HNUP

      Disengage the 4 clips and remove the rear floor finish plate.

  3. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK


    1. A01HNZ1E01
      Text in Illustration
      *1 Pin

      Push the 2 pins and remove the 2 No. 1 luggage compartment trim hooks.

  4. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER LH


    1. A01HPY3E01
      Text in Illustration
      *1 Clip <A>
      *2 Clip <B>

      Remove the clip <A>.

    2. Remove the 2 clips <B>.

    3. A01HR0W

      Disengage the fastener and remove the luggage compartment inner trim cover LH.

  5. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER RH


    1. A01HMYEE01
      Text in Illustration
      *1 Clip <A>
      *2 Clip <B>

      Remove the clip <A>.

    2. Remove the 2 clips <B>.

    3. A01HMRD

      Disengage the fastener and remove the luggage compartment inner trim cover RH.

  6. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER LH


    1. A01HQ4Y

      Disengage the 4 claws and remove the luggage compartment door hinge cover LH.

  7. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  8. REMOVE LUGGAGE DOOR HINGE TORSION BAR LH


    1. A01HN8TE01

      Disengage the hook in the order indicated in the illustration and disconnect the rear seatback lock assembly LH (rear seat lock control cable LH).

      Tech Tips

      Use the same procedure as for the LH side and RH side.

    2. A01HPPZE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the luggage door hinge.

    3. A01HOZOE01

      Using SST, disconnect the luggage door hinge torsion bar LH from the luggage door hinge and the left side of the vehicle body as shown in the illustration.

      SST
      09804-24010
    4. A01HO3N

      Disengage the 2 claws as shown in the illustration.

    5. A01HMS2

      Disconnect the luggage door hinge torsion bar LH from the luggage compartment door torsion bar support as shown in the illustration.

    6. A01HP6Z

      Remove the luggage door hinge torsion bar LH from the right side of the vehicle body as shown in the illustration.

  9. REMOVE LUGGAGE DOOR HINGE TORSION BAR RH


    1. A01HOMJE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the luggage door hinge.

    2. A01HP79E01

      Using SST, disconnect the luggage door hinge torsion bar RH from the luggage door hinge and the right side of the vehicle body as shown in the illustration.

      SST
      09804-24010
    3. A01HOFJ

      Disconnect the luggage door hinge torsion bar RH from the luggage compartment door torsion bar support as shown in the illustration.

    4. A01HR23

      Remove the luggage door hinge torsion bar RH from the left side of the vehicle body as shown in the illustration.

  10. REMOVE LUGGAGE COMPARTMENT DOOR TORSION BAR SUPPORT


    1. A01HQS4

      Remove the luggage compartment door torsion bar support as shown in the illustration.

      Note

      Make sure to replace the luggage compartment door torsion bar support with a new one.