ROOM TEMPERATURE SENSOR REMOVAL


  1. REMOVE FRONT DOOR SCUFF PLATE LH


    1. A01HNV0

      Disengage the 10 claws and remove the front door scuff plate LH.

  2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH


    1. A01HPCC

      Remove the clip.

    2. Disengage the 2 clips and remove the cowl side trim sub-assembly LH.

  3. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH


    1. A01HOQS

      Disconnect the front door opening trim weatherstrip LH.

  4. REMOVE INSTRUMENT SIDE PANEL LH


    1. A01HO7A

      Using a moulding remover, disengage the 4 claws as shown in the illustration.

    2. A01HQ0A

      Disengage the 3 guides and remove the instrument side panel LH as shown in the illustration.

  5. REMOVE FRONT PANEL GARNISH LH


    1. A01HO8I

      Disengage the 3 claws, 2 clips and 8 guides to remove the front panel garnish LH.

  6. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. A01HOBK

      Disengage the claw and 2 guides to disconnect the hood lock control lever sub-assembly.

  7. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY


    1. A01HNWS

      Disengage the 4 clips to remove the lower instrument panel finish panel assembly.

    2. w/ Smart Key System:


      1. Disconnect the connector.

  8. REMOVE ROOM TEMPERATURE SENSOR (COOLER THERMISTOR)


    1. A01HR3W

      Disengage the 2 claws as shown in the illustration.

    2. Disconnect the cooler thermistor hose and connector and remove the room temperature sensor (cooler thermistor).