FRONT SEAT INNER BELT ASSEMBLY (for Power Seat) INSTALLATION


  1. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Seat)


    1. for TMMK Made:


      1. A01HOWJE01
        Text in Illustration
        *1 Protruding Part

        Install the front seat inner belt assembly LH with the nut.

        Torque:
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }

        Note

        Do not allow the anchor part of the front seat inner belt assembly LH to overlap the protruding part of the front seat adjuster.

      2. Engage the clamp.

      3. Engage each clamp under the front seat assembly.

    2. for SIA Made:


      1. A01HOOGE01
        Text in Illustration
        *1 Protruding Part

        Install the front seat inner belt assembly LH with the nut.

        Torque:
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }

        Note

        Do not allow the anchor part of the front seat inner belt assembly LH to overlap the protruding part of the front seat adjuster.

      2. Engage the clamp.

      3. Engage each clamp under the front seat assembly.

  2. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Seat)


    1. for TMMK Made:


      1. A01HPXAE01
        Text in Illustration
        *1 Protruding Part
        *2 Limit Switch

        Install the front seat inner belt assembly RH with the nut.

        Torque:
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }

        Note

        Do not allow the anchor part of the front seat inner belt assembly RH to overlap the protruding part of the front seat adjuster.

      2. Connect the limit switch with the screw.

      3. Connect the connector.

    2. for SIA Made:


      1. A01HOX8E01
        Text in Illustration
        *1 Protruding Part
        *2 Limit Switch

        Install the front seat inner belt assembly RH with the nut.

        Torque:
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }

        Note

        Do not allow the anchor part of the front seat inner belt assembly RH to overlap the protruding part of the front seat adjuster.

      2. Connect the limit switch with the screw.

      3. Engage each clamp under the front seat assembly.

  3. INSTALL FRONT SEAT INNER CUSHION SHIELD RH (for Front Passenger Seat)

    for TMMK Made: Click here

    for SIA Made: Click here

  4. INSTALL FRONT SEAT ASSEMBLY

    for TMMK Made: Click here

    for SIA Made: Click here