FRONT SEAT CUSHION HEATER REMOVAL

REMOVE FRONT POWER SEAT SWITCH (for TMMK Made)

Click here
REMOVE FRONT SEAT INNER CUSHION SHIELD (for TMMK Made)
1. Remove the 2 screws and front seat inner cushion shield.
REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD (for TMMK Made)
1. Disconnect the connector (A).
2. Disengage the clamp (B).
3. Disengage the claw (D) and 3 clamps (C) to separate the front seat airbag assembly wire harness.
4. w/ Seat Heater System:
  1. Disconnect the connector (E).
  2. Disengage the clamp (F).
5. for Driver Side:
  1. Separate the separate type front seat cushion cover.
6. for Front Passenger Side:
  1. Separate the separate type front seat cushion cover.
7. Disengage the 4 hooks.
8. Disengage each hook and remove the separate type front seat cushion cover with pad.
REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER (for TMMK Made)
1. Remove the 12 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.
REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY (for TMMK Made)
1. Remove the 20 tag pins and the front seat cushion heater assembly from the separate type front seat cushion cover.
REMOVE FRONT SEAT ASSEMBLY (for SIA Made)

Click here
DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER (for SIA Made)
1. Disconnect the rubber band of the separate type front seatback cover.
REMOVE NO. 1 FRONT SEAT INNER CUSHION SHIELD (for SIA Made)
1. Remove the screw.
2. Disengage the 2 claws to remove the clip from the front No. 1 seat inner cushion shield as shown in the illustration.
3. Disengage the 3 claws and 3 guides to remove the front No. 1 seat inner cushion shield as shown in the illustration.
REMOVE FRONT SEAT CUSHION SHIELD (for SIA Made Driver Side)
1. Disengage the 4 claws, 7 guides and clip to remove the front seat cushion shield.
2. Text in Illustration
  
  *1 Wire Harness Cover
  
  Disengage the 2 claws and open the wire harness cover.
3. Remove the wire harness from the wire harness cover.
4. Disengage the 2 wire harness clamps.
5. Disconnect the front power seat switch connector.
6. Disconnect the front lumbar power seat switch connector.
REMOVE FRONT SEAT CUSHION SHIELD (for SIA Made Front Passenger Side)
1. Disengage the 4 claws, 8 guides and clip to remove the front seat cushion shield.
2. Text in Illustration
  
  *1 Wire Harness Cover
  
  Disengage the 3 claws and open the wire harness cover.
3. Remove the wire harness from the wire harness cover.
4. Disengage the 2 wire harness clamps.
5. Disconnect the front power seat switch connector.
REMOVE FRONT SEAT INNER CUSHION SHIELD (for SIA Made Driver Side)
1. Disengage the 5 claws and 6 guides to remove the front seat inner cushion shield.
REMOVE FRONT SEAT INNER CUSHION SHIELD (for SIA Made Front Passenger Side)
1. Disengage the 5 claws and 7 guides to remove the front seat inner cushion shield.
REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD (for SIA Made)
1. Disengage the fastener and separate the front seat airbag assembly wire harness.
2. Disengage the claw and 3 clamps to separate the front seat airbag assembly wire harness.
3. w/ Seat Heater System:
  1. Disconnect the connector.
  2. Disengage the clamp.
  3. Disconnect the connector.
  4. Disengage the 2 clamps to separate the seat heater wire harness.
4. Disengage the hook.
5. Disengage each hook and remove the separate type front seat cushion cover with pad.
REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER (for SIA Made)
1. Remove the 2 hog rings.
2. Remove the 16 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.
REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY (for SIA Made)
1. Remove the 34 tag pins and the front seat cushion heater assembly from the separate type front seat cushion cover.