FRONT SEATBACK HEATER INSTALLATION

INSTALL FRONT SEATBACK HEATER ASSEMBLY (for TMMK Made)
1. Using a tacker, install the front seatback heater assembly to the separate type front seatback cover with 8 new tag pins.
INSTALL SEPARATE TYPE FRONT SEATBACK COVER (for TMMK Made)
1. Using hog ring pliers, install the separate type front seatback cover to the separate type front seatback pad with 2 new hog rings.
  Note
  
  Be careful not to damage the separate type front seatback cover.
  
  Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.
2. Engage the 2 fasteners.
INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for TMMK Made)
1. Temporarily install the separate type front seatback cover with pad.
2. Engage the 4 claws to install the 2 front seat headrest supports.
3. Engage the 2 hooks.
  CAUTION:
  - For vehicles with a front seat airbag assembly, the separate type front seatback cover must be securely installed. Otherwise, the front seat airbag assembly may not deploy properly.
  - Make sure that the strap is not twisted after engage the 2 hooks.
  - Engage the 2 hooks securely.
  1. Slide each hook to engage them.
  2. Install the 4 clips.
4. Engage the 2 fasteners.
5. Engage the hook.
CONNECT CONNECTORS (for TMMK Made)
1. Engage the claw (D) and 3 clamps (C) to install the front seat airbag assembly wire harness.
2. Engage the clamp (B).
3. Connect the connector (A).
4. Connect the connector (E).
5. Engage the clamp (F).
CONNECT SEPARATE TYPE FRONT SEATBACK COVER (for TMMK Made)
1. Connect the 2 rubber bands of the separate type front seatback cover.
INSTALL FRONT SEAT ASSEMBLY (for TMMK Made)

Click here
INSTALL FRONT SEATBACK HEATER ASSEMBLY (for SIA Made)
1. Using a tacker, install the front seatback heater assembly to the separate type front seatback cover with 12 new tag pins.
INSTALL SEPARATE TYPE FRONT SEATBACK COVER (for SIA Made)
1. Using hog ring pliers, install the separate type front seatback cover to the separate type front seatback pad with 6 new hog rings.
  Note
  
  Be careful not to damage the separate type front seatback cover.
  
  Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.
INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for SIA Made)
1. Temporarily install the separate type front seatback cover with pad.
2. Engage the 4 claws to install the 2 front seat headrest supports.
3. Install the 3 brackets with the 2 nuts.
  
  Torque:
  
  5.5 N*m { 56 kgf*cm, 49 in.*lbf }
  CAUTION:
  - For vehicles with side airbags, the separate type front seatback cover must be securely installed. Otherwise, the side airbags may not deploy properly.
  - Make sure that the strap is not twisted after installing the nut.
  - Install the bracket securely.
4. Turn back the separate type front seatback cover.
5. Using hog ring pliers, install the 2 new hog rings.
  Note
  - Be careful not to damage the separate type front seatback cover.
  - Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.
6. Using hog ring pliers, install 3 new hog rings.
  
  Note
  
  Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.
7. Using hog ring pliers, install 5 new hog rings.
  Note
  
  Be careful not to damage the separate type front seatback cover.
  
  Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.
CONNECT CONNECTOR (for SIA Made)
1. Engage the clamp.
2. Connect the connector.
CONNECT SEPARATE TYPE FRONT SEATBACK COVER (for SIA Made)
1. Connect the rubber band of the separate type front seatback cover.
INSTALL FRONT SEAT ASSEMBLY (for SIA Made)

Click here