LUMBAR SUPPORT ADJUSTER ASSEMBLY (for TMMK Made Power Seat) REMOVAL


  1. REMOVE FRONT SEAT ASSEMBLY LH

    Click here

  2. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER


    1. A01HMU5

      Disconnect the 2 rubber bands of the separate type front seatback cover.

  3. DISCONNECT CONNECTORS


    1. A01HNRZE01

      Disconnect the connector (A).

    2. Disengage the clamp (B).

    3. Disengage the claw (D) and 3 clamps (C) to separate the front seat airbag assembly wire harness.

    4. Disconnect the connector (E).

    5. Disengage the clamp (F).

  4. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    1. A01HPMZ

      Disengage the hook.

    2. A01HOZR

      Disengage the 2 fasteners.

    3. A01HMON

      Turn back the separate type front seatback cover.

    4. A01HMLX

      Disengage the 2 hooks.


      1. Remove the 4 clips.

      2. Slide each hook to disengage them.

    5. A01HQAO

      Disengage the 4 claws and remove the 2 front seat headrest supports.

    6. A01HMHK

      Remove the separate type front seatback cover with pad.

  5. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY


    1. A01HN8Y

      Disconnect the connector.

    2. Disengage the 4 claws.

    3. Disengage the 2 guides to remove the lumbar support adjuster assembly.

    4. Remove the 2 front seatback hooks from the lumbar support adjuster assembly.