POWER SEAT SWITCH INSTALLATION


  1. INSTALL FRONT POWER SEAT SWITCH (for TMMK Made)


    1. Install the front power seat switch to a new front seat cushion shield with the 3 screws.

  2. INSTALL FRONT SEAT CUSHION SHIELD (for TMMK Made)


    1. for Driver Side:


      1. Engage the 4 claws to install the front lumbar power seat switch to the front seat cushion shield.

    2. Connect the front power seat switch connector.

    3. Engage the wire harness clamp.

    4. Engage the 2 claws to install the front seat cushion shield.

    5. Install the screw.

      Torque:
      0.6 N*m  { 6 kgf*cm, 5 in.*lbf }

  3. CONNECT SEPARATE TYPE FRONT SEATBACK COVER (for TMMK Made)


    1. Connect the 2 rubber bands of the separate type front seatback cover.

  4. INSTALL RECLINING POWER SEAT SWITCH KNOB (for TMMK Made)


    1. Engage the 4 claws to install the reclining power seat switch knob.

  5. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB (for TMMK Made)


    1. Engage the 4 claws to install the slide and vertical power seat switch knob.

  6. INSTALL FRONT SEAT ASSEMBLY (for TMMK Made)

    Click here

  7. INSTALL FRONT POWER SEAT SWITCH (for SIA Made)


    1. Install the front power seat switch to the front seat cushion shield with the 3 screws.

  8. INSTALL FRONT SEAT CUSHION SHIELD (for SIA Made Driver Side)


    1. Connect the front lumbar power seat switch connector.

    2. Connect the front power seat switch connector.

    3. Engage the 2 wire harness clamps.

    4. Install the wire harness to the wire harness cover.

    5. Engage the 2 claws to close the wire harness cover.

    6. Engage the 4 claws, 7 guides and clip to install the front seat cushion shield.

  9. INSTALL FRONT SEAT CUSHION SHIELD (for SIA Made Front Passenger Side)


    1. Connect the front power seat switch connector.

    2. Engage the 2 wire harness clamps.

    3. Install the wire harness to the wire harness cover.

    4. Engage the 3 claws to close the wire harness cover.

    5. Engage the 4 claws, 8 guides and clip to install the front seat cushion shield.

  10. INSTALL NO. 1 FRONT SEAT INNER CUSHION SHIELD (for SIA Made)


    1. A01HPEA

      Engage the 3 claws and 3 guides to install the front No. 1 seat inner cushion shield as shown in the illustration.

    2. A01HQIV

      Engage the 2 claws to install the clip to the front No. 1 seat inner cushion shield as shown in the illustration.

    3. Install the screw.

  11. CONNECT SEPARATE TYPE FRONT SEATBACK COVER (for SIA Made)


    1. Connect the rubber band of the separate type front seatback cover.

  12. INSTALL RECLINING POWER SEAT SWITCH KNOB (for SIA Made)


    1. Engage the 4 claws to install the reclining power seat switch knob.

  13. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB (for SIA Made)


    1. Engage the 4 claws to install the slide and vertical power seat switch knob.

  14. INSTALL FRONT SEAT ASSEMBLY (for SIA Made)

    Click here