FRONT SEAT ASSEMBLY (for SIA Made Manual Seat) DISASSEMBLY


  1. REMOVE SEAT ADJUSTER COVER CAP


    1. A01HNNQ

      Remove the 2 seat adjuster cover caps.

  2. REMOVE RECLINING ADJUSTER RELEASE HANDLE


    1. A01HNJRE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the reclining adjuster release handle.

  3. REMOVE VERTICAL ADJUSTING HANDLE (for Driver Side)


    1. A01HO5A

      Remove the screw and vertical adjusting handle.

  4. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER


    1. A01HO2F

      Disconnect the rubber band of the separate type front seatback cover.

  5. REMOVE FRONT SEAT CUSHION SHIELD (for Driver Side)


    1. A01HN42

      Remove the screw.

    2. Disengage the 5 claws, 6 guides and clip to remove the front seat cushion shield.

  6. REMOVE FRONT SEAT CUSHION SHIELD (for Front Passenger Side)


    1. A01HPBJ

      Remove the screw.

    2. Disengage the 5 claws, 7 guides and clip to remove the front seat cushion shield.

  7. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Driver Side)


    1. A01HQNJ

      Disengage the 5 claws and 6 guides to remove the front seat inner cushion shield.

  8. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Front Passenger Side)


    1. A01HP24

      Disengage the 5 claws and 7 guides to remove the front seat inner cushion shield.

  9. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)


    1. for TMMK Made:


      1. Disengage each clamp under the front seat assembly.

      2. A01HP2G

        Disengage the clamp.

      3. Remove the nut and front seat inner belt assembly LH.

    2. for SIA Made:


      1. Disengage each clamp under the front seat assembly.

      2. A01HNV6

        Disengage the clamp.

      3. Remove the nut and front seat inner belt assembly LH.

  10. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)


    1. for TMMK Made:


      1. A01HONRE01
        Text in Illustration
        *1 Limit Switch

        Disconnect the connector.

      2. Remove the screw and disconnect the limit switch.

      3. Remove the nut and front seat inner belt assembly RH.

    2. for SIA Made:


      1. Disengage each clamp under the front seat assembly.

      2. A01HO4AE01
        Text in Illustration
        *1 Limit Switch

        Remove the screw and disconnect the limit switch.

      3. Remove the nut and front seat inner belt assembly RH.

  11. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. A01HOSL

      Disengage the fastener and separate the front seat airbag assembly wire harness.

    2. A01HOLR

      Disengage the claw and 3 clamps to separate the front seat airbag assembly wire harness.

    3. A01HPK4

      Disengage the hook.

    4. A01HOER

      Disengage each hook and remove the separate type front seat cushion cover with pad.

  12. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A01HQ2D

      Remove the 2 hog rings.

    2. A01HNQV

      Remove the 16 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.

  13. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    1. A01HO6H

      Remove the 5 hog rings.

    2. A01HN40

      Remove the 3 hog rings.

    3. A01HQII

      Remove the 2 hog rings.

    4. Turn back the separate type front seatback cover.

    5. A01HQV3

      Remove the 2 nuts and the 3 brackets.

    6. A01HOV7

      Disengage the 4 claws and remove the 2 front seat headrest supports.

    7. Remove the separate type front seatback cover with pad.

  14. REMOVE FRONT SEAT AIRBAG ASSEMBLY


    1. A01HPUJ

      Disengage the 2 clamps.

    2. Remove the 2 nuts and the front seat airbag assembly.

      CAUTION:


      • The nuts must not be reused.

      • Make sure that the front seatback frame sub-assembly or separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.

  15. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. A01HP3P

      Remove the 6 hog rings and separate type front seatback cover from the separate type front seatback pad.

  16. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (for Driver Side)


    1. A01HQSE

      Remove the screw.

    2. Disengage the hook as shown in the illustration.

    3. Disengage the clip and remove the front seat lower cushion shield LH.

  17. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH (for Driver Side)


    1. A01HOS2

      Remove the screw.

    2. Disengage the hook as shown in the illustration.

    3. Disengage the clip and remove the front seat lower cushion shield RH.

  18. REMOVE RECLINING ADJUSTER INSIDE COVER LH


    1. A01HMRU

      Disengage the guide and remove the reclining adjuster inside cover LH.

  19. REMOVE RECLINING ADJUSTER INSIDE COVER RH


    1. A01HQPR

      Disengage the guide and remove the reclining adjuster inside cover RH.

  20. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH (for Driver Side)


    1. A01HP7W

      Remove the screw.

    2. Disengage the 3 claws to remove the front seat cushion edge protector LH.

  21. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH (for Driver Side)


    1. A01HO9Q

      Remove the screw.

    2. Disengage the 3 claws to remove the front seat cushion edge protector RH.

  22. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH (for Front Passenger Side)


    1. A01HQIQ

      Remove the screw.

    2. Disengage the 3 claws to remove the front seat cushion edge protector LH.

  23. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH (for Front Passenger Side)


    1. A01HMU0

      Remove the screw.

    2. Disengage the 3 claws to remove the front seat cushion edge protector RH.

  24. REMOVE OCCUPANT DETECTION ECU (for Front Passenger Side)


    1. A01HOVWE01
      Text in Illustration
      *1 Protective Tape

      Disconnect the 2 connectors.

    2. Using a screwdriver with the tip wrapped with protective tape, disengage the claw and remove the occupant detection ECU.

  25. REMOVE FRONT SEAT WIRE RH (for Front Passenger Side)


    1. Disconnect the connectors and disengage the wire harness clamps to remove the front seat wire RH.

  26. REMOVE SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY


    1. A01HODI

      Remove the 4 bolts.

    2. Disengage the 4 guides to remove the separate type front seatback spring assembly.

  27. REMOVE SEAT TRACK ADJUSTING HANDLE


    1. A01HPYE

      Disengage the 2 springs to remove the seat track adjusting handle.