FRONT SEAT ASSEMBLY (for SIA Made Power Seat) DISASSEMBLY


  1. REMOVE SEAT ADJUSTER COVER CAP


    1. A01HQDI

      Remove the 2 seat adjuster cover caps.

  2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. A01HOYB

      Using a moulding remover, disengage the 4 claws to remove the slide and vertical power seat switch knob.

  3. REMOVE RECLINING POWER SEAT SWITCH KNOB


    1. A01HP6S

      Using a moulding remover, disengage the 4 claws to remove the reclining power seat switch knob.

  4. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER


    1. A01HPS9

      Disconnect the rubber band of the separate type front seatback cover.

  5. REMOVE FRONT NO. 1 SEAT INNER CUSHION SHIELD


    1. A01HP6B

      Remove the screw.

    2. Disengage the 2 claws to remove the clip from the front No. 1 seat inner cushion shield as shown in the illustration.

    3. A01HNHJ

      Disengage the 3 claws and 3 guides to remove the front No. 1 seat inner cushion shield as shown in the illustration.

    4. A01HPOP

      Using a clip remover, remove the clip.

  6. REMOVE FRONT SEAT CUSHION SHIELD (for Driver Side)


    1. A01HNBZ

      Disengage the 4 claws, 7 guides and clip to remove the front seat cushion shield.

    2. A01HNRBE01
      Text in Illustration
      *1 Wire Harness Cover

      Disengage the 2 claws and open the wire harness cover.

    3. Remove the wire harness from the wire harness cover.

    4. Disengage the 2 wire harness clamps.

    5. Disconnect the front power seat switch connector.

    6. A01HNUJ

      Disconnect the front lumbar power seat switch connector.

  7. REMOVE FRONT SEAT CUSHION SHIELD (for Front Passenger Side)


    1. A01HO7U

      Disengage the 4 claws, 8 guides and clip to remove the front seat cushion shield.

    2. A01HPV2E01
      Text in Illustration
      *1 Wire Harness Cover

      Disengage the 3 claws and open the wire harness cover.

    3. Remove the wire harness from the wire harness cover.

    4. Disengage the 2 wire harness clamps.

    5. Disconnect the front power seat switch connector.

  8. REMOVE FRONT POWER SEAT SWITCH


    1. A01HNSS

      Remove the 3 screws and front power seat switch from the front seat cushion shield.

  9. REMOVE FRONT LUMBAR POWER SEAT SWITCH (for Driver Side)


    1. A01HQP3

      Disengage the 4 claws to remove the front lumbar power seat switch from the front seat cushion shield.

  10. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Driver Side)


    1. A01HQNJ

      Disengage the 5 claws and 6 guides to remove the front seat inner cushion shield.

  11. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Front Passenger Side)


    1. A01HP24

      Disengage the 5 claws and 7 guides to remove the front seat inner cushion shield.

  12. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)


    1. for TMMK Made:


      1. Disengage each clamp under the front seat assembly.

      2. A01HP2G

        Disengage the clamp.

      3. Remove the nut and front seat inner belt assembly LH.

    2. for SIA Made:


      1. Disengage each clamp under the front seat assembly.

      2. A01HNV6

        Disengage the clamp.

      3. Remove the nut and front seat inner belt assembly LH.

  13. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)


    1. for TMMK Made:


      1. A01HMIDE01
        Text in Illustration
        *1 Limit Switch

        Disconnect the connector.

      2. Remove the screw and disconnect the limit switch.

      3. Remove the nut and front seat inner belt assembly RH.

    2. for SIA Made:


      1. Disengage each clamp under the front seat assembly.

      2. A01HON5E01
        Text in Illustration
        *1 Limit Switch

        Remove the screw and disconnect the limit switch.

      3. Remove the nut and front seat inner belt assembly RH.

  14. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. A01HODQ

      Disengage the fastener and separate the front seat airbag assembly wire harness.

    2. A01HQ62

      Disengage the claw and 3 clamps to separate the front seat airbag assembly wire harness.

    3. w/ Seat Heater System:


      1. A01HOK2

        Disconnect the connector.

      2. Disengage the clamp.

      3. A01HQPC

        Disconnect the connector.

      4. Disengage the 2 clamps to separate the seat heater wire harness.

    4. A01HNWC

      Disengage the hook.

    5. A01HPOH

      Disengage each hook and remove the separate type front seat cushion cover with pad.

  15. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A01HQ2D

      Remove the 2 hog rings.

    2. A01HNQV

      Remove the 16 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.

  16. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY (w/ Seat Heater System)


    1. A01HOWY

      Remove the 34 tag pins and the front seat cushion heater assembly from the separate type front seat cushion cover.

  17. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    1. A01HOEW

      Remove the 5 hog rings.

    2. A01HOJJ

      Remove the 3 hog rings.

    3. A01HQII

      Remove the 2 hog rings.

    4. Turn back the separate type front seatback cover.

    5. A01HPQO

      Remove the 2 nuts and the 3 brackets.

    6. A01HOV7

      Disengage the 4 claws and remove the 2 front seat headrest supports.

    7. Remove the separate type front seatback cover with pad.

  18. REMOVE FRONT SEAT AIRBAG ASSEMBLY


    1. A01HPUJ

      Disengage the 2 clamps.

    2. Remove the 2 nuts and the front seat airbag assembly.

      CAUTION:


      • The nuts must not be reused.

      • Make sure that the front seatback frame sub-assembly or separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.

  19. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. A01HP3P

      Remove the 6 hog rings and separate type front seatback cover from the separate type front seatback pad.

  20. REMOVE FRONT SEATBACK HEATER ASSEMBLY (w/ Seat Heater System)


    1. A01HNFS

      Remove the 12 tag pins and the front seatback heater assembly from the separate type front seatback cover.

  21. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (for Driver Side)


    1. A01HOW4

      Remove the screw.

    2. Disengage the hook as shown in the illustration.

    3. Disengage the clip and remove the front seat lower cushion shield LH.

  22. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH (for Driver Side)


    1. A01HNHQ

      Remove the screw.

    2. Disengage the hook as shown in the illustration.

    3. Disengage the clip and remove the front seat lower cushion shield RH.

  23. REMOVE UPPER RECLINING ADJUSTER INSIDE COVER LH


    1. A01HOTE

      Disengage the 2 guides to remove the upper reclining adjuster inside cover LH.

  24. REMOVE UPPER RECLINING ADJUSTER INSIDE COVER RH


    1. A01HQ9D

      Disengage the 2 guides to remove the upper reclining adjuster inside cover RH.

  25. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH (for Driver Side)


    1. A01HMSJ

      Remove the screw.

    2. Disengage the 3 claws to remove the front seat cushion edge protector LH.

  26. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH (for Driver Side)


    1. A01HOQK

      Remove the screw.

    2. Disengage the 3 claws to remove the front seat cushion edge protector RH.

  27. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH (for Front Passenger Side)


    1. A01HQ7W

      Remove the screw.

    2. Disengage the 3 claws to remove the front seat cushion edge protector LH.

  28. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH (for Front Passenger Side)


    1. A01HPSG

      Remove the screw.

    2. Disengage the 3 claws to remove the front seat cushion edge protector RH.

  29. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Seat Heater System)


    1. A01HQA0

      Disconnect the connector.

    2. Disengage the 2 clamps and remove the seat heater control sub-assembly.

  30. REMOVE OCCUPANT DETECTION ECU (for Front Passenger Side)


    1. A01HOVWE01
      Text in Illustration
      *1 Protective Tape

      Disconnect the 2 connectors.

    2. Using a screwdriver with the tip wrapped with protective tape, disengage the claw and remove the occupant detection ECU.

  31. REMOVE FRONT SEAT WIRE


    1. Disconnect the connectors and disengage the wire harness clamps to remove the front seat wire.

  32. REMOVE FRONT NO. 2 SEAT WIRE


    1. Disconnect the connectors and disengage the wire harness clamps to remove the front No. 2 seat wire.

  33. REMOVE FRONT SEAT WIRE RH (for Front Passenger Side)


    1. Disconnect the connectors and disengage the wire harness clamps to remove the front seat wire RH.

  34. REMOVE SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY


    1. A01HQAU

      Remove the 4 bolts

    2. Disengage the 4 guides to remove the separate type front seatback spring assembly.