FRONT SEAT SIDE AIRBAG ASSEMBLY REMOVAL

CAUTION:


  • Be sure to read Precaution thoroughly before servicing Click here.

  • Wear protective gloves. Sharp areas on the seat frame and adjuster may injure your hands.

  • If the side airbag was deployed, replace the front seat airbag assembly, front seatback frame sub-assembly or separate type front seatback spring assembly, separate type front seatback cover and separate type front seatback pad with the necessary parts in accordance with the extent of the collision damage.

    for TMMK Made Manual Seat: Click here

    for SIA Made Manual Seat: Click here

    for TMMK Made Power Seat: Click here

    for SIA Made Power Seat: Click here

Tech Tips

Use the same procedure for the LH side and RH side.


  1. REMOVE FRONT SEAT ASSEMBLY (for TMMK Made Manual Seat)

    Click here

  2. REMOVE FRONT SEAT ASSEMBLY (for SIA Made Manual Seat)

    Click here

  3. REMOVE FRONT SEAT ASSEMBLY (for TMMK Made Power Seat)

    Click here

  4. REMOVE FRONT SEAT ASSEMBLY (for SIA Made Power Seat)

    Click here

  5. DISCONNECT AIRBAG WIRE HARNESS (for TMMK Made Manual Seat)


    1. A01HP3V

      Disconnect the 2 rubber bands of the separate type front seatback cover with pad.

    2. A01HQWS

      Disengage the claw and 3 clamps to disconnect the airbag wire harness.

  6. DISCONNECT AIRBAG WIRE HARNESS (for SIA Made Manual Seat)


    1. A01HO2F

      Disconnect the rubber band of the separate type front seatback cover with pad.

    2. A01HOSL

      Disengage the fastener and separate the airbag wire harness.

    3. A01HOLR

      Disengage the claw and 3 clamps to disconnect the airbag wire harness.

  7. DISCONNECT AIRBAG WIRE HARNESS (for TMMK Made Power Seat)


    1. A01HMU5

      Disconnect the 2 rubber bands of the separate type front seatback cover with pad.

    2. A01HNRZE01

      Disconnect the connector (A).

    3. Disengage the clamp (B).

    4. Disengage the claw (D) and 3 clamps (C) to disconnect the airbag wire harness.

    5. w/ Seat Heater System:


      1. Disconnect the connector (E).

      2. Disengage the clamp (F).

  8. DISCONNECT AIRBAG WIRE HARNESS (for SIA Made Power Seat)


    1. A01HMIT

      Disconnect the rubber band of the separate type front seatback cover with pad.

    2. A01HODQ

      Disengage the fastener and separate the airbag wire harness.

    3. A01HQUT

      Disengage the claw and 3 clamps to disconnect the airbag wire harness.

    4. w/ Seat Heater System:


      1. A01HOK2

        Disconnect the connector.

      2. Disengage the clamp.

  9. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for TMMK Made Manual Seat)


    1. A01HN1E

      Disengage the hook.

    2. A01HO3L

      Disengage the 2 fasteners.

    3. A01HOMS

      Turn back the separate type front seatback cover.

    4. A01HMLX

      Disengage the 2 hooks.


      1. Remove the 4 clips.

      2. Slide each hook to disengage them.

    5. A01HQAO

      Disengage the 4 claws and remove the 2 front seat headrest supports.

    6. A01HQLK

      Remove the separate type front seatback cover with pad.

  10. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for SIA Made Manual Seat)


    1. A01HO6H

      Remove the 5 hog rings.

    2. A01HN40

      Remove the 3 hog rings.

    3. A01HQII

      Remove the 2 hog rings.

    4. Turn back the separate type front seatback cover.

    5. A01HQV3

      Remove the 2 nuts and the 3 brackets.

    6. A01HOV7

      Disengage the 4 claws and remove the 2 front seat headrest supports.

    7. Remove the separate type front seatback cover with pad.

  11. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for TMMK Made Power Seat)


    1. A01HPMZ

      Disengage the hook.

    2. A01HOZR

      Disengage the 2 fasteners.

    3. A01HMON

      Turn back the separate type front seatback cover.

    4. A01HMLX

      Disengage the 2 hooks.


      1. Remove the 4 clips.

      2. Slide each hook to disengage them.

    5. A01HQAO

      Disengage the 4 claws and remove the 2 front seat headrest supports.

    6. A01HMHK

      Remove the separate type front seatback cover with pad.

  12. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for SIA Made Power Seat)


    1. A01HOEW

      Remove the 5 hog rings.

    2. A01HOJJ

      Remove the 3 hog rings.

    3. A01HQII

      Remove the 2 hog rings.

    4. Turn back the separate type front seatback cover.

    5. A01HPQO

      Remove the 2 nuts and the 3 brackets.

    6. A01HOV7

      Disengage the 4 claws and remove the 2 front seat headrest supports.

    7. Remove the separate type front seatback cover with pad.

  13. REMOVE FRONT SEAT AIRBAG ASSEMBLY


    1. A01HPUJ

      Disengage the 2 clamps.

    2. Remove the 2 nuts and the front seat airbag assembly.

      CAUTION:


      • The nuts must not be reused.

      • Make sure that the front seatback frame sub-assembly or separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.