METER / GAUGE SYSTEM INITIALIZATION


  1. MAINTENANCE REQUIRED REMINDER RESET PROCEDURE

    Tech Tips

    The ODO/TRIP change switch knob is located on the light side of the combination meter assembly.


    1. Turn the ignition switch to ON.

    2. Press the ODO/TRIP change switch knob until the TRIP A meter appears.

    3. Turn the ignition switch off.

    4. Turn the ignition switch to ON while pressing and holding the ODO/TRIP change switch knob. Hold the ODO/TRIP change switch knob until the following conditions are met and 5 seconds have elapsed.

    5. w/o Multi-information Display:


      1. The TRIP A meter shows "000000".

      2. The maintenance required reminder light goes off.

    6. w/ Multi-information Display:


      1. The TRIP A meter shows "000000".

      2. The multi-information display shows that the reset is complete.