IGNITION KEY CYLINDER LIGHT INSTALLATION


  1. INSTALL TRANSPONDER KEY AMPLIFIER


    1. Connect the connector to the transponder key amplifier.

    2. A01HQXI

      Engage the 2 claws to install the transponder key amplifier.

  2. INSTALL LOWER STEERING COLUMN COVER


    1. A01HN1X

      Engage the 2 claws.

    2. A01HP3O

      Engage the 2 claws.

      Tech Tips

      Press the area around the claws to engage them.

    3. Turn the steering wheel assembly to the left to install the screw.

      Torque:
      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }

    4. Turn the steering wheel assembly to the right to install the lower steering column cover with screw.

      Torque:
      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }

      Note


      • Check the steering column cover clearance to the steering wheel.

      • If the clearance is less than 3.5mm,confirm the steering column cover claws are correctly engaged.

      • Replace the steering column cover if any claws have been damaged.