LIGHTING SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the Techstream to the DLC3.

    2. Turn the ignition switch ON.

    3. Turn the Techstream on.

    4. Enter the following menus: Body Electrical / Main Body / Data List.

    5. Read the Data List according to the display on the Techstream.

      Main Body
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      ACC SW Ignition switch ACC signal/ON or OFF

      ON: Ignition switch ACC

      OFF: Ignition switch off

      -
      IG SW Ignition switch ON signal/ON or OFF

      ON: Ignition switch ON

      OFF: Ignition switch off

      -
      RR Door Courtesy SW Rear door courtesy light switch RH signal/ON or OFF

      ON: Rear door RH open

      OFF: Rear door RH closed

      -
      RL Door Courtesy SW Rear door courtesy light switch LH signal/ON or OFF

      ON: Rear door LH open

      OFF: Rear door LH closed

      -
      FR Door Lock Pos Front door RH unlock detection switch signal/LOCK or UNLOCK

      LOCK: Front door RH locked

      UNLOCK: Front door RH unlocked

      -
      FR Door Courtesy Front door courtesy light switch RH signal/ON or OFF

      ON: Front door RH closed

      OFF: Front door RH open

      -
      FL Door Lock Pos Front door LH unlock detection switch signal/LOCK or UNLOCK

      LOCK: Front door LH locked

      UNLOCK: Front door LH unlocked

      -
      FL Door Courtesy Front door courtesy light switch LH signal/ON or OFF

      ON: Front door LH closed

      OFF: Front door LH open

      -
      RR-Door Lock Pos SW Rear door RH unlock detection switch signal/ON or OFF

      ON: Rear door LH locked and rear door RH unlocked

      ON: Rear door LH unlocked and rear door RH locked

      ON: Rear door LH and rear door RH unlocked

      OFF: Rear door LH and rear door RH locked

      -
      RL-Door Lock Pos SW Rear door LH unlock detection switch/ON or OFF

      ON: Rear door LH locked and rear door RH unlocked

      ON: Rear door LH unlocked and rear door RH locked

      ON: Rear door LH and rear door RH unlocked

      OFF: Rear door LH and rear door RH locked

      -
      Luggage Courtesy SW Luggage compartment door courtesy switch signal/ON or OFF

      ON: Luggage compartment door open

      OFF: Luggage compartment door closed

      -
      Interior Light Control Operation of the illuminated entry system/OFF or ON

      OFF: System not operated

      ON: System operated

      Customized value is displayed
      I/L ON W/Door Key Unlock Function that lights up the interior lights when the doors are unlocked/OFF or ON

      OFF: Function disabled

      ON: Function enabled

      Customized value is displayed
      Lighting Time Lighting time of the delay control function (illuminated entry system)/15s, 7.5s or 30s

      15s: 15 seconds

      7.5s: 7.5 seconds

      30s: 30 seconds

      Customized value is displayed
      Room Light when Aprchd Function that lights up the interior lights when a key enters any actuation area/OFF or ON

      OFF: Function disabled

      ON: Function enabled

      Customized value is displayed
      I/L when ACC OFF Function that lights up the interior lights when the ignition switch is turned from on (ACC or IG) to off/OFF or ON

      OFF: Function disabled

      ON: Function enabled

      Customized value is displayed
  2. ACTIVE TEST

    Tech Tips

    Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the Techstream to the DLC3.

    2. Turn the ignition switch ON.

    3. Turn the Techstream on.

    4. Enter the following menus: Body Electrical / Main Body / Active Test.

    5. Perform the Active Test according to the display on the Techstream.

      Main Body
      Tester Display Test Part Control Range Diagnostic Note
      Illuminated Entry System Personal light*2 ,rear interior light and engine switch illumination*3 ON/OFF
      • No. 1 room light assembly switch in DOOR position*1

      • Interior light door switch is on*2

      Relay for Interior Light Auto Cut Function Light Auto Cut Relay ON/OFF -

      • *1: w/o Sliding Roof

      • *2: w/ Sliding Roof

      • *3: w/ Smart Key System