LIGHTING SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE LIGHTING SYSTEM (INT)


    1. Customizing using the Techstream

      Tech Tips

      The following items can be customized.

      Note


      • When the customer requests a change in a function, first make sure that the function can be customized.

      • Be sure to make a note of the current settings before customizing.

      • When troubleshooting a function, first make sure that the function is set to the default setting.


      1. Connect the Techstream to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the Techstream on.

      4. Enter the following menus: Customize Setting / Illuminated Entry.

      5. Select the setting by referring to the table below.

        Illuminated Entry
        Tester Display Default Content Setting Relevant ECU
        Lighting Time 15 s Changes the lighting time after closing all of the doors. (It will fade out immediately in case of turning the ignition switch from off to ACC or ON.) 7.5 s, 15 s or 30 s Main body ECU (Multiplex network body ECU)
        I/L when ACC OFF ON Lights up the engine switch illumination*1, ignition key cylinder light*2, personal light*3 and rear interior light when the ignition switch is turned from ACC or ON to off. ON or OFF
        I/L ON W/Door Key Unlock ON Lights up the engine switch illumination*1, ignition key cylinder light*2, personal light*3 and rear interior light when doors are unlocked using a mechanical key or door control transmitter. ON or OFF
        Room Light when Aprchd ON Lights up the engine switch illumination*1, ignition key cylinder light*2, personal light*3 and rear interior light when a key enters any actuation area around the doors. ON or OFF
        Interior Light Control ON Lights up the engine switch illumination*1, ignition key cylinder light*2, personal light*3 and rear interior light when the illuminated entry function is operating. ON or OFF

        • *1: w/ Smart Key System

        • *2: w/o Smart Key System

        • *3: w/ Sliding Roof

    2. Customizing using the Multi-display (w/ Navigation System (for Navigation Receiver Type) or w/ Audio and Visual System (for Radio and Display Type with Intuitive Parking Assist System))


      1. Turn the ignition switch to ON.

      2. Enter the following menus: Setup / Vehicle / Vehicle Customization / Light Settings

      3. Select the setting by referring to the table below:

        Display Default Content Setting Relevant ECU
        Interior Lights Off Timer 15 sec. Changes the lighting time after closing all of the doors. (It will fade out immediately in case of turning the ignition switch from off to ACC or ON.) Off, 7.5 sec., 15 sec., or 30 sec. Main body ECU (Multiplex network body ECU)