ENGINE HOOD COURTESY SWITCH INSTALLATION


  1. INSTALL ENGINE HOOD COURTESY SWITCH (HOOD LOCK ASSEMBLY)


    1. A01HP78

      Apply MP grease to the sliding areas of the lock.

    2. Connect the hood lock control cable assembly.

    3. Install the hood lock assembly with the 3 bolts.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

    4. w/ Engine Hood Courtesy Switch:


      1. Connect the connector.

  2. INSTALL RADIATOR GRILLE SUB-ASSEMBLY

    Click here

  3. INSPECT HOOD SUB-ASSEMBLY


    1. Check that the clearance measurements of areas a through d are within each standard range.

      A01HPPYE01
      Standard Clearance
      Area Measurement Area Measurement
      a 2.45 to 6.45 mm (0.0965 to 0.254 in.) b 3.55 to 7.55 mm (0.140 to 0.297 in.)
      c 2.0 to 5.0 mm (0.0787 to 0.197 in.) d -1.5 to 1.5 mm (-0.0591 to 0.0591 in.)

  4. ADJUST HOOD SUB-ASSEMBLY

    Click here