ELECTRICAL KEY OSCILLATOR (for Center Floor) INSTALLATION


  1. INSTALL NO. 2 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY


    1. Engage the clamp and Install the No. 2 indoor electrical key antenna assembly.

      Note

      Be careful when installing the indoor electrical key antenna assembly. If the antenna is dropped, replace it with a new one.

    2. Connect the connector.

  2. INSTALL REAR SEAT CUSHION LOCK HOOK


    1. A01HQ3J

      Engage the claw to install a new rear seat cushion lock hook.

      Note

      Rear seat cushion lock hooks must not be reused.

      Tech Tips

      Use the same procedure for the RH side and the LH side.

  3. INSTALL REAR SEAT CUSHION ASSEMBLY


    1. Place the rear seat cushion assembly in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. A01HMPP

      Engage the 2 hooks of the seat cushion to the vehicle body as shown in the illustration.

    3. Confirm that the seat cushion is firmly installed.

      Note

      When installing the seat cushion, make sure that the seat belt buckles are not under the seat cushion.