SFI SYSTEM, Diagnostic DTC:P0630

DTC Code DTC Name
P0630 VIN not Programmed or Mismatch - ECM / PCM

DESCRIPTION

DTC P0630 is stored when the Vehicle Identification Number (VIN) is not stored in the ECM or the input VIN is incorrect. The VIN is input with the intelligent tester.

DTC No. DTC Detection Condition Trouble Area
P0630

Either condition is met (1 trip detection logic):


  • VIN is not stored in the ECM.

  • Input VIN is incorrect.

 ECM

INSPECTION PROCEDURE

PROCEDURE


  1. READ CURRENT DTC


    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the intelligent tester on.

    4. Enter the following menus: Powertrain / Engine and ECT/ DTC.

    5. Read the DTCs.

      Result
      Result Proceed to
      P0630 is output A
      P0630 and other DTCs are output B

      Tech Tips

      If any DTCs other than P0630 are output, troubleshoot those DTCs first.

      Note

      If P0630 is stored, the VIN must be input to the ECM using the intelligent tester. However, all DTCs are cleared automatically by the intelligent tester when the VIN is input. If DTCs other than P0630 are output, troubleshoot them first.


    B

    GO TO DTC CHART Click here

    A

  2. INPUT VIN WITH INTELLIGENT TESTER


    1. Refer to Registration Click here.


    NEXT

    END