BLIND SPOT MONITOR SENSOR REMOVAL


  1. REMOVE REAR BUMPER ASSEMBLY

    Click here

  2. REMOVE BLIND SPOT MONITOR SENSOR LH


    1. A01HR4V

      Disengage the 2 clamps.

    2. A01HP2S

      Remove the 3 nuts.

    3. A01HP1Q

      Disconnect the connector to remove the blind spot monitor sensor LH.

      Note

      Replace the blind spot monitor sensor LH if it has been dropped or subjected to a severe impact.

  3. REMOVE BLIND SPOT MONITOR SENSOR RH


    1. A01HOCA

      Disengage the clamp.

    2. A01HNCM

      Remove the 3 nuts.

    3. A01HMM4

      Disconnect the connector to remove the blind spot monitor sensor RH.

      Note

      Replace the blind spot monitor sensor RH if it has been dropped or subjected to a severe impact.

  4. REMOVE BLIND SPOT MONITOR COVER LH


    1. A01HQ18

      Remove the 2 nuts.

    2. Disengage the claw to remove the blind spot monitor cover LH.

  5. REMOVE BLIND SPOT MONITOR COVER RH

    Tech Tips

    Use the same procedure as for the LH side.