ULTRASONIC SENSOR (for Rear Side) INSTALLATION


  1. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER


    1. A01HN2BE01
      Text in Illustration
      *A LH Side
      *B Other Side
      *a Keyhole
      *b Snap

      Engage the 2 claws to install the No. 1 ultrasonic sensor retainer to the rear bumper assembly.

      Note


      • Do not damage the front bumper with the protrusion when installing the retainer.

      • Securely install the No. 1 ultrasonic sensor retainer so that there are no gaps between the retainer and surface of the front bumper.

      Tech Tips

      When installing the retainer, align the keyhole and snap as shown in the illustration.

  2. INSTALL NO. 1 ULTRASONIC SENSOR


    1. A01HNBQE01
      Text in Illustration
      *A LH Side
      *B Other Side

      Engage the 2 claws to install the No. 1 ultrasonic sensor to the No. 1 ultrasonic sensor retainer.

      Note

      Push the No. 1 ultrasonic sensor retainer from the outside of the bumper when there is a gap between the retainer and the bumper surface. In this case, do not push on the ultrasonic sensor.

  3. INSTALL ULTRASONIC SENSOR CLIP


    1. A01HQMTE01
      Text in Illustration
      *A LH Side
      *B Other Side

      Engage the 4 claws to install the ultrasonic sensor clip.

    2. A01HQWXE01
      Text in Illustration
      *A LH Side
      *B Other Side

      Engage the clamp.

    3. Connect the connector.

  4. INSTALL REAR BUMPER ASSEMBLY

    Click here