NAVIGATION ECU INSTALLATION

INSTALL EXTENSION MODULE
1. Connect the connector to install the extension module.
2. Connect the 3 connectors to install the navigation wire.
INSTALL AIR CONDITIONING CONTROL ASSEMBLY
1. Engage the guide and 4 clips to install the air conditioning control assembly as shown in the illustration.
INSTALL NO. 1 RADIO BRACKET
1. w/o Navigation System:
  1. Install the No. 1 radio bracket with the 5 screws.
2. w/ Navigation System:
  1. Install the No. 1 radio bracket with the 7 screws.
INSTALL NO. 2 RADIO BRACKET
1. w/o Navigation System:
  1. Install the No. 2 radio bracket with the 5 screws.
2. w/ Navigation System:
  1. Install the No. 2 radio bracket with the 7 screws.
INSTALL RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY
1. Connect each connector.
2. Engage the 8 clips to the vehicle body to temporarily install the radio receiver assembly with air conditioning control assembly.
3. Install the radio receiver assembly with air conditioning control assembly with the 4 bolts.
INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
1. Engage the 6 clips to install the No. 2 instrument panel register assembly.
  
  Note
  
  When installing the No. 2 instrument panel register assembly, check that the wire harness is not caught between the No. 2 instrument panel register assembly and duct.
INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
1. Connect the connector.
2. Engage the clamp.
3. Engage the 6 clips and 7 claws to install the center instrument cluster finish panel assembly.
INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
1. Connect each connector.
2. Engage the 4 clips and guide.
3. Install the upper console panel sub-assembly with the 2 screws <C> or <D>.
INSTALL BOX BOTTOM MAT
1. Install the box bottom mat.
INSTALL REAR CONSOLE BOX ASSEMBLY

Click here