NAVIGATION ECU REMOVAL


  1. REMOVE REAR CONSOLE BOX ASSEMBLY

    Click here

  2. REMOVE BOX BOTTOM MAT


    1. A01HMY5

      Remove the box bottom mat.

  3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. A01HOHW

      Remove the 2 screws <C> or <D>.

    2. A01HNXD

      Disengage the 4 clips and guide as shown in the illustration.

    3. Disconnect each connector to remove the upper console panel sub-assembly.

  4. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    1. A01HN72

      Using a moulding remover, disengage the 2 claws and 2 clips as shown in the illustration.

    2. A01HQ31

      Using a moulding remover, disengage the 2 claws and 2 clips as shown in the illustration.

    3. A01HPK9

      Disengage the 3 claws and 2 clips as shown in the illustration.

    4. A01HQ1I

      Disengage the clamp.

    5. Disconnect the connector to remove the center instrument cluster finish panel assembly.

  5. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A01HQDQ

      Pull the No. 2 instrument panel register assembly in the direction indicated by the arrow to disengage the 6 clips to remove the No. 2 instrument panel register assembly.

  6. REMOVE RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY


    1. A01HNZOE01
      Text in Illustration
      *1 Protective Tape

      Apply protective tape to the area shown in the illustration.

    2. A01HP6V

      Remove the 4 bolts.

    3. A01HORE

      Pull the radio receiver assembly with air conditioning control assembly toward the rear of the vehicle and disengage the 8 clips.

    4. Disconnect each connector and remove the radio receiver assembly with air conditioning control assembly.

      Tech Tips

      w/ Navigation System:

      Do not disconnect the extension module connector.

  7. REMOVE NO. 1 RADIO BRACKET


    1. w/o Navigation System:


      1. A01HPE5

        Remove the 5 screws and No. 1 radio bracket.

    2. w/ Navigation System:


      1. A01HNXM

        Remove the 7 screws and No. 1 radio bracket.

  8. REMOVE NO. 2 RADIO BRACKET


    1. w/o Navigation System:


      1. A01HN1I

        Remove the 5 screws and No. 2 radio bracket.

    2. w/ Navigation System:


      1. A01HR4K

        Remove the 7 screws and No. 2 radio bracket.

  9. REMOVE AIR CONDITIONING CONTROL ASSEMBLY


    1. A01HO4M

      Disengage the 4 clips and guide, and remove the air conditioning control assembly as shown in the illustration.

  10. REMOVE EXTENSION MODULE


    1. A01HMUZ

      Disconnect the 3 connectors to remove the navigation wire.

    2. A01HPQ1

      Disconnect the connector to remove the extension module.