NAVIGATION SYSTEM (for Navigation Receiver Type) Cellular Phone Registration Failure, Phonebook Transfer Failure

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK OPERATION


    1. Place the cellular phone close to the navigation ECU sub-assembly.

    2. Check if the cellular phone can be registered.

      OK
      The cellular phone can be registered.

    NG
    OK
  2. CHECK CURRENT CONDITIONS


    1. Proceed to the next step according to the table below.

      Result
      Result Proceed to
      Another "Bluetooth" compatible cellular phone is available. A
      Another "Bluetooth" compatible vehicle is available. B
      None of the above C

    B
    C
    A
  3. CHECK USING ANOTHER CELLULAR PHONE


    1. Check if the system functions using another "Bluetooth" compatible cellular phone.

      Tech Tips


      • Confirm that either the same or a different version of another "Bluetooth" compatible cellular phone complies with the system.

      • Depending on the version, some "Bluetooth" compatible cellular phones cannot be used.

      OK
      The system functions.

    NG
    OK
  4. CHECK USING ANOTHER "Bluetooth" COMPATIBLE VEHICLE


    1. Register the cellular phone with another vehicle and check if the system functions normally.

      Tech Tips

      Depending on the version, some "Bluetooth" compatible cellular phones cannot be used.

      OK
      The system functions.

    NG
    OK
  5. CHECK CELLULAR PHONE


    1. Check if a call can be made from the cellular phone.

      Tech Tips

      The cellular phone is unable to call under any of the following conditions:


      • The cellular phone is locked.

      • The phonebook is being transferred.

      • The line is crossed.

      • The cellular phone is outside service range.

      • The power is off.

      • The battery is low.

      • The cellular phone is not connected via "Bluetooth".

      OK
      A call can be made from the cellular phone.

    NG
    OK