NAVIGATION SYSTEM (for Radio and Display Type) Display does not Dim when Light Control Switch is Turned ON

INSPECTION PROCEDURE

Note

After replacing the radio and display receiver assembly of vehicles subscribed to pay-type satellite radio broadcasts, XM radio ID registration is necessary (w/ SDARS System).

PROCEDURE


  1. CHECK IMAGE QUALITY SETTING


    1. A01HO0VE01
      Text in Illustration
      *a Example

      Display the "Display" screen.

    2. Turn the light control switch to the tail or head position.

    3. Check if "Day Mode" on the display adjustment screen is on.

      Result
      Result Proceed to
      "Day Mode" setting is on A
      "Day Mode" setting is off B

    B

    CHECK IMAGE QUALITY SETTING Click here

    A

    TURN "Day Mode" SETTING OFF

  2. CHECK IMAGE QUALITY SETTING


    1. A01HPITE01
      Text in Illustration
      *a Example

      Display the "Map Settings" screen.

    2. Turn the light control switch to the tail position.

    3. Check if "Day/Night Map" on the display adjustment screen is on.

      Result
      Result Proceed to
      "Day" is on A
      "Night" is on B
      "Automatic" is on

    B

    CHECK VEHICLE SIGNAL (OPERATION CHECK) Click here

    A

    TURN DAY/NIGHT MAP TO "Night" OR "Automatic"

  3. CHECK VEHICLE SIGNAL (OPERATION CHECK)


    1. A01HPDL

      Enter the "Vehicle Signal Check Mode" screen. Refer to Check Vehicle Signal in Operation Check Click here.

    2. Check that the display changes between ON and OFF according to the light control switch operation.

      OK
      Light Control Switch Display
      Tail or head ON
      Off OFF

      Tech Tips

      The display is updated once per second. It is normal for the display to lag behind the actual switch operation.


    NG

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here

    OK

    REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY Click here