STEERING WHEEL (for 3 Spoke) REMOVAL

Note


  • Do not replace the spiral cable with sensor sub-assembly with the battery connected and the ignition switch on (IG).

  • Do not rotate the spiral cable with sensor sub-assembly without the steering wheel with the battery connected and the ignition switch on (IG).

  • Ensure that the steering wheel is installed and aligned straight when inspecting the steering sensor.


  1. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

  2. REMOVE HORN BUTTON ASSEMBLY

    Click here

  3. REMOVE STEERING WHEEL ASSEMBLY


    1. A01HR4DE01
      Text in Illustration
      *a Matchmark

      Remove the steering wheel assembly set nut.

    2. Put matchmarks on the steering wheel assembly and steering main shaft.

    3. Disconnect the connectors from the spiral cable sub-assembly and steering wheel assembly.

    4. A01HMD1E01
      Text in Illustration
      *a Turn
      *b Hold

      Using SST, remove the steering wheel assembly.

      SST
      09950-50013   ( 09951-05010, 09952-05010, 09953-05020, 09954-05070 )

      Note

      Apply a small amount of grease to the threads and tip of SST (09953-05020) before use.

  4. REMOVE STEERING PAD SWITCH ASSEMBLY


    1. Disconnect the steering pad switch connector from the spiral cable sub-assembly.

    2. A01HO03E01
      Text in Illustration
      *1 Pin
      *2 Guide
      *3 Clamp

      Disconnect the No. 1 switch wire connector.

    3. Disengage the clamp.

    4. Remove the 2 screws.

    5. Disengage the 2 claws, 2 pins and 2 guides to remove the steering pad switch assembly.

  5. REMOVE SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) (for 2AR)

    A01HMG5

    1. Remove the 2 screws.

    2. Disengage the 4 pins and remove the 2 shift paddle switches (transmission shift switch assembly).

  6. REMOVE SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) (for 2GR)

    A01HMG5

    1. Remove the 2 screws.

    2. Disengage the 4 pins and remove the 2 shift paddle switches (transmission shift switch assembly).

  7. REMOVE NO. 1 SWITCH WIRE (for 2AR)


    1. A01HMST

      Disengage the 5 guides to remove the shift paddle switch (transmission shift switch assembly) with No. 1 switch wire from the steering wheel assembly.

    2. A01HOW2E01
      Text in Illustration
      *1 Clamp

      Remove the 2 clamps.

    3. Disconnect the 2 connectors to remove the 2 shift paddle switches (transmission shift switch assembly) from the No. 1 switch wire.

  8. REMOVE NO. 1 SWITCH WIRE (for 2GR)


    1. A01HMST

      Disengage the 5 guides to remove the shift paddle switch with No. 1 switch wire from the steering wheel assembly.

    2. A01HOW2E01
      Text in Illustration
      *1 Clamp

      Remove the 2 clamps.

    3. Disconnect the 2 connectors to remove the 2 shift paddle switches (transmission shift switch assembly) from the No. 1 switch wire.

  9. REMOVE CRUISE CONTROL MAIN SWITCH


    1. A01HNCZ

      Remove the 2 screws.

    2. A01HP7N

      Disconnect the connector and remove the cruise control main switch.

  10. REMOVE CRUISE CONTROL SWITCH WIRE


    1. Remove the cruise control switch wire.

  11. REMOVE STEERING SHAKE DAMPER


    1. A01HMJY

      Remove the 2 screws and steering shake damper from the steering wheel sub-assembly.