TIRE PRESSURE WARNING SYSTEM, Diagnostic DTC:C2176/76

DTC Code DTC Name
C2176/76 Receiver Error

DESCRIPTION

The signals are transmitted to the tire pressure warning ECU and receiver in the vehicle as radio waves.

DTC No. DTC Detection Condition Trouble Area
C2176/76 Malfunction in the tire pressure warning ECU and receiver internal circuit Tire pressure warning ECU and receiver

INSPECTION PROCEDURE

Note


  • When replacing the tire pressure warning ECU and receiver, read the transmitter IDs stored in the old ECU using the Techstream and write them down before removal.

  • It is necessary to perform registration Click here of the transmitter IDs into the tire pressure warning ECU and receiver if the ECU has been replaced.

  • When replacing the tire pressure warning ECU and receiver on vehicles equipped with the wireless door lock control system (w/o smart key system), be sure to perform Registration of Recognition Code to register the transmitter IDs after ECU replacement Click here.

PROCEDURE


  1. CHECK DTC OUTPUT (C2176/76)


    1. Clear the DTCs Click here.

    2. Turn the ignition switch off.

    3. Turn the ignition switch to ON and check for DTCs Click here.

      OK
      DTC C2176/76 is not output.

    NG

    REPLACE TIRE PRESSURE WARNING ECU AND RECEIVER Click here

    OK

    END