ECM INSTALLATION


  1. INSTALL NO. 2 ECM BRACKET


    1. Install the No. 2 ECM bracket with the 2 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  2. INSTALL NO. 1 ECM BRACKET


    1. Install the No. 1 ECM bracket with the 2 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  3. INSTALL ECM


    1. Install the ECM with the bolt and nut.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    2. Connect the 6 connectors.

  4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY


    1. Install the glove compartment door Click here.

  5. PERFORM REGISTRATION (w/o DPF)


    1. Perform registration Click here.

      Tech Tips

      Only perform registration when the ECM is replaced, either by itself or in any of the following combinations.


      • ECM and Fuel Supply Pump

      • ECM and Diesel Throttle Body Assembly

      • ECM and Injector Assembly

      • ECM and Engine Assembly

  6. PERFORM REGISTRATION (w/ DPF)


    1. Perform registration Click here.

      Tech Tips

      Only perform registration when the ECM is replaced, either by itself or in any of the following combinations.


      • ECM and Fuel Supply Pump

      • ECM and Diesel Throttle Body Assembly

      • ECM and Injector Assembly

      • ECM and Engine Assembly

  7. START ENGINE (w/o DPF)


    1. When replacing the ECM, start the engine to initialize the new ECM Click here.

  8. START ENGINE (w/ DPF)


    1. When replacing the ECM, start the engine to initialize the new ECM Click here.