Click here

ECM INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL NO. 2 ECM BRACKET


    1. Install the No. 2 ECM bracket with the 2 screws.

      3.0 N*m 31 kgf*cm 27 in.*lbf
  2. Click here

    INSTALL NO. 1 ECM BRACKET


    1. Install the No. 1 ECM bracket with the 2 screws.

      3.0 N*m 31 kgf*cm 27 in.*lbf
  3. Click here

    INSTALL ECM


    1. Install the ECM with the bolt and nut.

      8.0 N*m 82 kgf*cm 71 in.*lbf

    2. Connect the 6 connectors.

  4. Click here

    INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY


    1. Install the glove compartment door (Click here).

  5. Click here

    PERFORM REGISTRATION (w/o DPF)


    1. Perform registration (Click here).

      Tip:

      Only perform registration when the ECM is replaced, either by itself or in any of the following combinations.


      • ECM and Fuel Supply Pump

      • ECM and Diesel Throttle Body Assembly

      • ECM and Injector Assembly

      • ECM and Engine Assembly

  6. Click here

    PERFORM REGISTRATION (w/ DPF)


    1. Perform registration (Click here).

      Tip:

      Only perform registration when the ECM is replaced, either by itself or in any of the following combinations.


      • ECM and Fuel Supply Pump

      • ECM and Diesel Throttle Body Assembly

      • ECM and Injector Assembly

      • ECM and Engine Assembly

  7. Click here

    START ENGINE (w/o DPF)


    1. When replacing the ECM, start the engine to initialize the new ECM (Click here).

  8. Click here

    START ENGINE (w/ DPF)


    1. When replacing the ECM, start the engine to initialize the new ECM (Click here).