DIESEL THROTTLE BODY (w/ DPF) REMOVAL


  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    1. A01DSATE01
      Text in Illustration
      *1 No. 1 Engine Cover Hook
      *2 No. 3 Engine Cover Bracket

      Remove the 2 nuts.

    2. Detach the 2 No. 1 engine cover hooks from the No. 3 engine cover bracket and remove the No. 1 engine cover.

  2. DISCONNECT NO. 4 VACUUM TRANSMITTING PIPE SUB-ASSEMBLY


    1. A01DTH4

      Remove the bolt and disconnect the No. 4 vacuum transmitting pipe.

  3. DISCONNECT INTERCOOLER AIR HOSE


    1. A01DQ82

      Loosen the hose clamp and disconnect the intercooler air hose.

  4. REMOVE NO. 1 INTAKE PIPE


    1. A01DO4G

      Disconnect the 2 connectors from the intake air temperature sensor and throttle position sensor.

    2. Detach the 2 wire harness clamps.

    3. A01DRSZ

      Loosen the 2 hose clamps of the No. 1 air hose.

    4. Remove the 2 bolts and No. 1 intake pipe.

  5. REMOVE DIESEL THROTTLE BODY ASSEMBLY


    1. A01DTWE

      Disconnect the throttle control motor connector.

    2. Remove the 2 bolts, 2 nuts, diesel throttle body and gasket.