Click here

CRANKSHAFT POSITION SENSOR REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE GENERATOR ASSEMBLY


    1. Remove the generator (Click here).

  2. Click here

    REMOVE COOLER COMPRESSOR ASSEMBLY (w/ Air Conditioning System)


    1. Remove the cooler compressor (Click here).

  3. Click here

    REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY


    1. Remove the 4 bolts.

    2. A01DQWQ

      Unhook the engine under cover from the vehicle body as shown in the illustration.

  4. Click here

    REMOVE IDLER PULLEY ASSEMBLY (w/o Air Conditioning System)


    1. Remove the 3 bolts and idler pulley.

  5. Click here

    REMOVE CRANKSHAFT POSITION SENSOR


    1. A01DN04

      Disconnect the sensor connector.

    2. Remove the bolt and sensor.