CAMSHAFT OIL CONTROL VALVE REMOVAL


  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    1. A01HQOT

      Lift the rear of the engine cover to detach the cover from the 2 pins, and then lift the front of the engine cover to detach the cover from the pin and remove the engine cover.

      Note

      Attempting to disengage both front and rear clips at the same time may cause the No. 1 engine cover sub-assembly to break.

  2. SEPARATE ENGINE WIRE


    1. A01HO18

      Remove the 2 nuts and separate the engine wire.

  3. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY


    1. Camshaft timing oil control valve assembly (for exhaust side)


      1. A01HOBV

        Disconnect the oil control valve connector.

      2. Remove the bolt and oil control valve.

      3. A01HR0IE06
        Text in Illustration
        *1 O-ring

        Remove the O-ring from the oil control valve.

    2. Camshaft timing oil control valve assembly (for intake side)


      1. A01HOX2

        Disconnect the oil control valve connector.

      2. Remove the bolt and oil control valve.

      3. A01HR0IE06
        Text in Illustration
        *1 O-ring

        Remove the O-ring from the oil control valve.