RADIATOR REMOVAL


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work Click here.

  2. DRAIN ENGINE COOLANT

    Note

    Do not remove the radiator cap sub-assembly or radiator drain cock plug while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.


    1. Loosen the radiator drain cock plug.

    2. Remove the radiator cap sub-assembly.

      A01HP2DE01
      Text in Illustration
      *1 Radiator Cap Sub-assembly *2 Radiator Drain Cock Plug

      Tech Tips

      Collect the coolant in a container and dispose of it according to the regulations in your area.

  3. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

  4. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

  5. REMOVE ENGINE UNDER COVER RH

  6. REMOVE ENGINE UNDER COVER LH

  7. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. REMOVE COOL AIR INTAKE DUCT SEAL


    1. A01HOR8

      Remove the 7 clips and cool air intake duct seal.

  9. REMOVE INLET AIR CLEANER ASSEMBLY


    1. A01HN8W

      Remove the 2 bolts and inlet air cleaner assembly.

  10. REMOVE RADIATOR GRILLE SUB-ASSEMBLY


    1. A01HPLEE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the radiator grille sub-assembly.

    2. Remove the 3 clips.

    3. Disengage the 8 claws, and remove the radiator grille sub-assembly.

      A01HN9CE01
      Text in Illustration
      *A for Standard *B for Sport Package

  11. REMOVE RADIATOR RESERVE TANK ASSEMBLY


    1. A01HO5F

      Disconnect the radiator reserve tank hose.

    2. Remove the 2 bolts and radiator reserve tank assembly.

  12. DISCONNECT NO. 1 RADIATOR HOSE


    1. A01HPQC

      Disconnect the No. 1 radiator hose.

  13. DISCONNECT NO. 2 RADIATOR HOSE


    1. A01HPH2

      Disconnect the No. 2 radiator hose and clamp.

  14. REMOVE HOOD LOCK ASSEMBLY


    1. w/ Engine Hood Courtesy Switch:


      1. A01HNQQ

        Disconnect the connector.

    2. A01HOWK

      Remove the 3 bolts.

    3. A01HNX9

      Disconnect the hood lock control cable assembly and remove the hood lock assembly.

  15. REMOVE UPPER RADIATOR SUPPORT


    1. A01HOUT

      Disconnect the 2 connectors.

    2. A01HNOU

      Disconnect the hood lock control cable clamp and remove the 5 bolts and upper radiator support.

    3. Remove the 2 radiator support cushions.

  16. REMOVE RADIATOR ASSEMBLY


    1. A01HQH7

      Disconnect the 2 clamps and 2 connectors.

    2. A01HNR7

      Remove the 4 bolts and separate the condenser assembly from the radiator assembly.

    3. A01HPPM

      Remove the radiator assembly with fan assembly.

      Note

      Do not apply any excessive force to the cooler condenser assembly or pipe when removing the radiator assembly.

    4. Remove the 2 lower radiator supports.

    5. A01HNW8

      Release the 3 claws and lift the fan assembly from the radiator.