AIR FUEL RATIO SENSOR INSTALLATION

INSTALL AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)

1. 

   Text in Illustration

   *a	Fulcrum Length 30 mm (1.18 in.)
   *b	Fulcrum Length 180 mm (7.09 in.)

   Using SST, install the air fuel ratio sensor to the exhaust manifold RH.

   SST

   09224-00010

   Torque:

   without SST

   44 N*m  { 449 kgf*cm, 33 ft.*lbf }

   with SST

   40 N*m  { 408 kgf*cm, 30 ft.*lbf }

   Note

   
   

   • The "with SST" torque value is effective when using SST with a fulcrum length of 30 mm (1.18 in.) and a torque wrench with a fulcrum length of 180 mm (7.09 in.) Click here.

   • The "with SST" torque value is effective when SST is parallel to the torque wrench.

   Tech Tips

   Perform "Inspection After Repair" after replacing the air fuel ratio sensor Click here.

2. Connect the harness clamp.

3. Connect the air fuel ratio sensor connector.

INSTALL FRONT EXHAUST PIPE ASSEMBLY

Click here.

INSTALL AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)

1. 

   Text in Illustration

   *a	Fulcrum Length 30 mm (1.18 in.)
   *b	Fulcrum Length 180 mm (7.09 in.)

   Using SST, install the air fuel ratio sensor to the exhaust manifold LH.

   SST

   09224-00010

   Torque:

   without SST

   44 N*m  { 449 kgf*cm, 33 ft.*lbf }

   with SST

   40 N*m  { 408 kgf*cm, 30 ft.*lbf }

   Note

   
   

   • The "with SST" torque value is effective when using SST with a fulcrum length of 30 mm (1.18 in.) and a torque wrench with a fulcrum length of 180 mm (7.09 in.) Click here.

   • The "with SST" torque value is effective when SST is parallel to the torque wrench.

   Tech Tips

   Perform "Inspection After Repair" after replacing the air fuel ratio sensor Click here.

2. Connect the air fuel ratio sensor connector.

3. Install the wire harness clamp.

INSPECT FOR EXHAUST GAS LEAK