CAMSHAFT OIL CONTROL VALVE INSTALLATION


  1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY


    1. A01HN92E06
      Text in Illustration
      *1 New O-ring

      Apply a light coat of engine oil to 4 new O-rings and install them to the 4 camshaft timing oil control valve assemblies.

    2. Install the 4 oil control valves with the 4 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      Make sure that each O-ring is not cracked or does not jump out of position during installation.

    3. Connect the 4 oil control valve connectors.

  2. CONNECT ENGINE WIRE


    1. Install the 2 wire harness brackets with the 2 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    2. Connect the 3 wire harness clamps.

  3. INSTALL INTAKE AIR SURGE TANK ASSEMBLY

    Click here.