IGNITION COIL AND SPARK PLUG INSTALLATION

Tech Tips

Perform "Inspection After Repair" after replacing the spark plug and ignition coil assembly Click here.


  1. INSTALL SPARK PLUG


    1. A01HQB8

      Install the 6 spark plugs.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

      Tech Tips

      Perform "Inspection After Repair" after replacing the spark plug Click here.

  2. INSTALL IGNITION COIL ASSEMBLY


    1. Install the 6 ignition coils with the 6 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Tech Tips

      Perform "Inspection After Repair" after replacing the ignition coil assembly Click here.

    2. Connect the 6 ignition coil connectors.

    3. Connect the 2 wire harness clamps.

    4. Install the nut.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  3. INSTALL NO. 1 SURGE TANK STAY

    Note

    Do not apply oil to the bolt as listed below:

    Oil Application Prohibited Bolt
    Bolt for No. 1 surge tank stay and cylinder head cover

    1. Install the No. 1 surge tank stay with the bolt.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

  4. INSTALL INTAKE AIR SURGE TANK ASSEMBLY

    Click here.