IGNITION COIL AND SPARK PLUG REMOVAL


  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    1. A01HQOT

      Lift the rear of the engine cover to detach the cover from the 2 pins, and then lift the front of the engine cover to detach the cover from the pin and remove the engine cover.

      Note

      Attempting to disengage both front and rear clips at the same time may cause the No. 1 engine cover sub-assembly to break.

  2. REMOVE IGNITION COIL ASSEMBLY


    1. Disconnect the 4 ignition coil assembly connectors.

    2. A01HMK6

      Remove the 4 bolts and 4 ignition coil assemblies.

  3. REMOVE SPARK PLUG


    1. A01HOZM

      Using a spark plug wrench, remove the 4 spark plugs.