Click here

СТАРТЕР УСТАНОВКА

Click here
Click here
  1. Click here

    INSTALL STARTER ASSEMBLY


    1. Install the flywheel housing side cover.

    2. Install the starter with the 2 bolts.

      37 N*m 377 kgf*cm 27 ft.*lbf

    3. Install the starter wire with the nut.

      9.8 N*m 100 kgf*cm 87 in.*lbf

    4. Connect the starter connector.

  2. Click here

    INSTALL STARTER COVER


    1. Install the starter cover with the 3 bolts.

      12 N*m 117 kgf*cm 8 ft.*lbf
  3. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  4. Click here

    INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY RH

    (Click here)