Click here

СТАРТЕР СНЯТИЕ

Click here
Click here
  1. Click here

    REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH

    (Click here)

  2. Click here

    DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    • w/ Navigation System:

      After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  3. Click here

    REMOVE STARTER COVER


    1. A01EN4B

      Remove the 3 bolts and starter cover.

  4. Click here

    REMOVE STARTER ASSEMBLY


    1. A01ENB0

      Disconnect the starter connector.

    2. Remove the nut and disconnect the starter wire.

    3. A01EQGD

      Remove the 2 bolts and starter.

    4. A01EPSA

      Remove the flywheel housing side cover.