Click here

ДАТЧИК УРОВНЯ ТОПЛИВА В СБОРЕ (для расширительного топливного бачка) УСТАНОВКА

Click here
Click here
  1. Click here

    INSTALL FUEL SENDER GAUGE ASSEMBLY


    1. Install a new gasket to the sender gauge.

    2. Install the sender gauge with the 5 screws.

      1.5 N*m 15 kgf*cm 13 in.*lbf
      Note:

      Be careful not to bend the arm of the fuel sender gauge.

    3. Connect the sender gauge connector.

  2. Click here

    INSTALL REAR FLOOR SERVICE HOLE COVER


    1. Install the service hole cover with new butyl tape.

  3. Click here

    INSTALL REAR NO. 7 AIR DUCT


    1. A01ER8TE01

      Attach the 4 clips to install the air duct.

      Tip:

      Attach the clips in the order shown in the illustration.

  4. Click here

    INSTALL REAR FLOOR MAT ASSEMBLY


    1. Attach the 5 clips to install the floor mat.

  5. Click here

    INSTALL REAR NO. 1 SEAT ASSEMBLY AND REAR NO. 2 SEAT ASSEMBLY

    (Click here)

  6. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).