Click here

ТОПЛИВНЫЙ НАСОС РАЗБОРКА

Click here
Click here
Note: Do not disconnect the hoses indicated in the illustration.
Click here
  1. Click here

    REMOVE FUEL SENDER GAUGE ASSEMBLY


    1. A01ES72

      Отсоедините разъем датчика уровня топлива.

    2. A01ER7VE03

      Нажмите на захват датчика уровня топлива А. Затем сдвиньте датчик вверх, чтобы снять его.

      Table 1. Обозначения на рисунке
      A01EO1M Вдавите
      A01ER4J Сдвиньте
  2. Click here

    REMOVE NO. 1 FUEL SUB-TANK


    1. A01ES6I

      Disconnect the fuel pump connector.

    2. A01ESA3E03

      Disconnect the jet pump (labeled A) from the No. 1 fuel sub-tank.

      Table 2. Text in Illustration
      *1 Jet Pump

    3. Disconnect the jet pump (labeled B) from the No. 1 fuel sub-tank.


      1. Using a small screwdriver, detach the claw from the No. 1 fuel sub-tank.

        Tip:

        Tape the screwdriver tip before use.

    4. A01EQXI

      Using a screwdriver, detach the 3 claws from the claw holes.

      Note:

      Do not damage the No. 1 fuel sub-tank.

      Tip:

      Tape the screwdriver tip before use.

    5. A01EOYE

      Using a screwdriver, detach the 3 claws from the claw holes.

      Note:

      Do not damage the No. 1 fuel sub-tank.

      Tip:

      Tape the screwdriver tip before use.

  3. Click here

    REMOVE FUEL PUMP


    1. A01EQUQE03

      Using a screwdriver, detach the 5 claws from the claw holes and disconnect the fuel pump from the fuel filter case.

      Table 3. Text in Illustration
      *1 Fuel Filter Case
      Tip:

      Tape the screwdriver tip before use.

    2. A01EOB7

      Disconnect the fuel pump wire harness connector from the fuel pump to remove it.

    3. A01EOO3E02

      Remove the O-ring and spacer from the fuel pump.

      Table 4. Text in Illustration
      *1 O-Ring
      *2 Spacer
  4. Click here

    REMOVE FUEL MAIN VALVE ASSEMBLY


    1. A01ENRWE02

      Remove the fuel main valve from the fuel filter case.

      Table 5. Text in Illustration
      *1 Fuel Filter Case
      *2 O-Ring

    2. Remove the 2 O-rings from the fuel main valve.

  5. Click here

    REMOVE NO. 1 FUEL SUCTION SUPPORT


    1. A01EQR7

      Detach the 2 claws from the claw holes to remove the fuel suction support.